[AI] Stape by Stape using scanner:
akhil.akhil29 at gmail.com
Wed Jun 9 05:52:36 EDT 2010
Kurzwaile may be the best for reading huge and bulky books, but the
fine reader is the best software to scan the printed matterial.
mr. Raju, you should switch to fine reader as well.
On 6/9/10, Raju singh <bidhwin at gmail.com> wrote:
> Hello Namita, this is Raju singh, replying you a message specially to you
> that if you use HP scanner, or any other scanner, scanner should be properly
> installed. after that, one of the software, KURZWEIL 1000 is YouKnow, the
> best software for the blind, otherwise visually Handicapped, which enables
> us to read any printed material Written in the English. if you have kurzweil
> 1000 software running on your computer, go to "settings" "scanning" and then
> finally "the selected scanner is". Here you have to press up/down arrow to
> select scanner. if you have multiple scan installed on your computer, select
> one scanner and then press "enter". now while holding "0" from your nomad
> key, press "-" on your nomad key, until kurzweil says "setting keypad.".
> then release your "0" key. now you only have to press "-" button from your
> nomad key to save your changes. remember that all this procedure needs your
> scanner in the running stage. if scanner is nut open, kurzweil1000 is not be
> able to detect your scanner source, hence "the selected scanner" will not be
> shown in the settings menu.
> I think this tricks will helpful for you.
> If any other querie related to computer, let me know.
> Voice your thoughts in the blog to discuss the Rights of persons with
> disability bill at:
> To unsubscribe send a message to accessindia-request at accessindia.org.in with
> the subject unsubscribe.
> To change your subscription to digest mode or make any other changes, please
> visit the list home page at
Visit my blog at:
More information about the AccessIndia